Header Right

Ceiling Fan Light Kit Installation How To

If your ceiling fan has no housing assembly at the center of it, then you will not be able to attach a lighting assembly. Be sure there is no housing cover before you give up, as the way they are attached can be hidden with decorative details, such as an embellished cover. Assess whether there are wires inside the housing for a lighting assembly. Because you will want to be able to control the light and the fan separately, there will need to be existing wiring inside the housing to allow light assembly operation.

You should see several wires inside the housing that are capped off by themselves with wire nuts. They could be a variety of colors but most likely will be black power and white neutral. With any luck the wires inside the housing will even be labeled with something like "lighting power" or something like that.

This is a very good sign that you will be able to attach a lighting assembly. Measure the attachment point on your ceiling fan. Now that you know you have power for a lighting assembly, you will need to know the size lighting assembly you need to find. Measure the diameter of the opening and pay attention to where screw holes should be located on a lighting assembly in order to attach easily to your existing ceiling fan. Also make note of the company and style name or number of your ceiling fan. Parts from the same company are more likely to fit your existing fan.

Visit a home improvement store to find the appropriate ceiling fan light kit.

How to Add a Light Kit to Your Ceiling Fan

If you cannot find the right part, don't hesitate to ask someone working at the store to help you. Some companies sell universal ceiling fan lighting kits that fit a variety of their models.


  • gulbarga dating site.
  • How to Wire a Fan & Light With Black, White & Blue Wires | Home Guides | SF Gate;
  • electrical - How do I wire a ceiling fan? - Home Improvement Stack Exchange;
  • How to Add a Light Kit to Your Ceiling Fan | Mr. Electric;

Make sure to check that the style name or number of your fan is listed as an acceptable match for the lighting assembly you buy. If you cannot find the right lighting assembly at a home improvement store try elsewhere. A lot of cities now have companies that salvage construction parts and resell them to the public.

You should also look online at the website of the company who manufactured you ceiling fan. They may sell directly to the public or the site may direct you to a company that does.

Replacing Light Fixture with Paddle Ceiling Fan

Ceiling fan lighting assemblies come in a variety of styles. For instance, you will need to decide whether you would like to attach a fixture that has one, two, or three light bulb sockets. Turn off the circuit breaker that controls the power to your ceiling fan. Between the time you assessed whether you could possibly attach a light assembly and when you actually install it, you have probably turned back on the circuit breaker. Make sure that you turn it off once again! Unscrew the cap hiding the wires and set it aside. Be sure to keep track of the parts you are removing.

You will probably no longer need the cap but you may need any screws that it was attached with. Connect the light's wires to the fan's wires with wire nuts. In most cases you will be attaching wires that are the same color together. For instance if there is a white and a black wire in the ceiling fan and a white and black wire coming out the back of the lighting assembly, simply wire nut like colors together. The popularity of ceiling fans continues to grow as more and more homeowners discover dramatic, year-round energy savings. In summer, ceiling fans create cooling breezes, which reduce the strain on air conditioners.

In winter, they circulate heated air to keep the room warm. Installing a ceiling fan is relatively simple, especially if the space above is accessible from an attic. However, even when it isn't, the job is still quite doable. Here, we'll show how to replace an old light fixture with a new ceiling fan and light, in a room with no attic above. The advantage of this approach is that you don't have to run new wiring. The fan connects to the existing cable from the old light.

Just remember, electrical boxes used for ceiling lights aren't strong enough to hold a ceiling fan.

Ceiling Fan Overview

You must replace the existing electrical box with one designed for ceiling fans. There are few fixtures that can impact the look and livability of a room as much as a ceiling fan. It can keep you cool on sultry summer days, push warm air down into the room during winter, and even serve as the room's primary illumination if you add a light. Replacing an existing light fixture with a fan is a simple, one-day task since the wiring is already in place.

However—and this is very important—you can't just hang the fan from the existing electrical box. It's simply not strong enough to support the added weight and vibration of a fan. Presuming you don't have access to the ceiling fan from above, you must either use a specially rated hanger and box to mount the fan between joists or, better yet, screw a fan-rated "pancake" box so called because it's very thin directly to a ceiling joist.

Make sure electricity to circuit is turned off and carefully remove the glass shade or globe from the old light fixture. Lower the fixture and disconnect the wires by twisting off the plastic connectors from the ends of the wires. Remove the old electrical box from the ceiling. If it's nailed to a joist, pry it free with a flat bar. If it's suspended from a bar, you may have to take off a metal plate to unscrew the box; then pry the bar from the joists. Hold a vacuum cleaner wand next to the saw to catch the dust.

Turn off the ceiling fan circuit at the main breaker panel if you have not already turned it off. Use a step ladder to reach the electrical box at the ceiling.

Special Offers

Hold a non-contact voltage sensor inside the box next to the black wire. The alarm will sound and the sensor will flash if electricity is present. Hang your ceiling fan from the mounting bracket. When installing a ceiling fan with the down rod, you can insert the ceiling fan down rod into the bracket, and the bracket will hold the weight of the fan.

A flush mount ceiling fan has a small hook on the motor that connects to the bracket and holds the weight of the fan for wiring. Inspect the wires inside your electrical box. The black wire is the hot wire and leads back to the wall switch.

Available 24/7:

The white wire, known as neutral, completes the electrical circuit. The bare copper wire is the ground wire.


  1. kent dating agency.
  2. dating nineteenth century photographs.
  3. sehun and irene dating.
  4. dating tinder verification.
  5. I’m your Biggest Fan – Installing a Light Kit on an Existing Ceiling Fan.
  6. How to Install a Light on a Ceiling Fan: 11 Steps (with Pictures);
  7. If you have two toggle switches on the wall that operate the ceiling fan motor and light separately, you should have an additional red wire inside the box. Look at the wires coming from your ceiling fan. The black wire from the ceiling fan is the hot wire that runs the motor and turns the fan blades. The white wire is neutral and completes the fan circuit.