Want to enjoy your favorite music, podcasts, or audiobooks while you drive? The answer is to hook your phone up to your car. But what is the best way to do this? While CDs are a good choice, they scratch easily and you have to swap them often.
Using your Android phone with your car stereo (How To)
Fortunately, a smartphone with storage space for MP3s, and online connectivity for streaming is a good alternative. Here are the car mounts you should buy. Read More should help and the necessary range or cable to send a signal to your in-car audio system, you can use an Android phone for your audio entertainment while driving. These offline GPS apps for Android will help you navigate. Read More , then it makes sense to rely on your phone for music in the car too. Four options will allow you to play music stored on or streamed via your Android phone, through a typical car audio system.
As such, taking your hand off the wheel and eyes off the road to change track, find a new radio station, switch audiobook chapter, or load a new podcast is dangerous. If you need to make a change to the music, you should either:. If worst comes to worst, you could switch to broadcast radio. The most obvious solution is to use an analog cable like this model from StarTech connecting the 3.
- dating websites singapore free.
- Two Basic Methods of Accessing Music!
- Reader Interactions!
- highschool hook up prom.
For instance, you might have a standard line-in connector mounted on the front of your car audio system or elsewhere on the center console , providing easy access. Alternatively, you may need to run the cable into the dashboard in order to hook up your phone. Older audio systems with a cassette tape player allow you to use a cassette adapter. This is a small, low-cost device that connects to the headphone jack on your phone and allows you to play music into the car audio system.
Many modern car audio systems have Bluetooth as an option for playing music across a short-range wireless network. In order to take advantage of this, begin by activating Bluetooth on the car audio system, making sure that it is discoverable. You can also find your way here by pulling down the notification shade and long-pressing the Bluetooth button. Wait for the screen to update and display your car audio system, then select it to pair. Once done, your phone should automatically pair with the car in future.
For the best results, your phone should have Bluetooth 4. We've got you covered. Here's everything you need to know about using Google Maps on Android.
- rules dating married man.
- dating site used on online dating rituals.
- 5 Ways To Connect Android With Car Stereo.
- expat dating warsaw.
- asian dating in bay area.
- Roadshow Newsletter!
Read More or some other GPS app , you should keep your phone charged while driving. Like Bluetooth, some modern car stereos have a USB port that you can use to connect external storage devices. The idea makes sense. Cell phones are just as portable as many music players, and many people refuse to go anywhere without a cell phone. It's natural for these users to want to listen to music while in the car driving. One option for doing this is to connect the cell phone to the car audio system , enabling it to play the music on the phone through the car speakers.
This enables users to continue listening where they left off and avoids the need for duplicating the music on multiple formats or devices. If a listener can connect his or her cell phone to the car stereo, there is no need to keep CDs in the car. It also means there is no need to worry about what music is where: Connecting a cell phone to a car stereo is both easy and effective. There is no reason why anyone who listens to music on their phone should not take advantage of the ability to connect it to their existing car stereo. There are two basic ways to play music from a cell phone through a car stereo.
Android: Connecting to a Car Stereo
One can either connect the cell phone's output to the auxiliary input on the car stereo, or if the car stereo supports it, the cell phone can be connected as a mass storage device so the stereo can read its contents directly. Either choice has advantages and disadvantages, and which one a particular user chooses depends on their needs and requirements. In many cases the simplest option is to use the cell phone's headphone output to feed directly to the stereo's auxiliary input. The big advantage of this method is that it lets listeners take full advantage of all the playlists on the phone so users can just hit play and continue exactly where they left off before they got into the car.
One disadvantage of this method is that unless the phone is plugged into power, this will drain the battery, which can be a concern for those who do not have a car charger. The other issue to consider is that all the controls except the volume remain on the phone, meaning that the listener has to pick up the phone and look at it rather than the road to change a playlist or skip a song. While this is certainly possible, it is not always safe to do while in the car. The second option is to use the phone as a mass storage device. In this mode, the stereo treats the phone as it would any other storage device and simply play back the music stored on it in the same way it would from a memory card or USB stick.
While this option does not always provide access to any playlists the user might have, it does allow the use of the car's audio controls rather than those on the phone, which is much safer. Another benefit of this option is that in many cases the phone is able to draw power from the USB connection, which not only extends the playing time but also means that an avid listener may not need to charge their phone the moment they get out of the car or risk losing battery during a long trip.
When it comes to making the connection between the phone and the car stereo, the user has four options: Each wired option requires its own cable, while the wireless option relies on either the cell phone's built in Bluetooth capabilities or FM transmitter if it has one. The simplest connection available is between the cell phone's headphone jack and the car stereo's auxiliary input.
The Universal Option: Bluetooth FM Transmitters
Both connectors are ubiquitous, and the only additional hardware requirement is a male to male 3. One connector goes in the headphone jack, and the other goes in the auxiliary input, and a connection is made. The phone can be connected to the stereo in about five seconds, fewer if the cable is already attached to the input, and it is only a matter of moments before the music is playing. Some cars even have an additional connector on the console to make connecting a cell phone that much easier.
While there are disadvantages to this particular connection method, it is impossible to understate the importance of its widespread availability.
Music Transmitter for Cigarette Lighter
Almost anyone with the requisite cable can connect a cell phone to a car stereo this way. If the car stereo supports it, which not all do, another option is to use a USB cable. This normally puts the cell phone into mass storage mode, which enables the stereo to see it as just another data source.